PPE Respiratory Accessories

FFP (Filtering Face Piece) masks are divided into three categories: FFP1, FFP2 and FFP3. FFP1 offers protection against non-toxic particles such as dust, and is suitable for light tasks. FFP2 filters at least 94% of particles, and is suitable for environments with moderate pathogens, which is why it is widely used in the healthcare and industrial sectors. FFP3 offers the highest level of protection, filtering up to 99% of particles, including carcinogens and highly toxic biological agents. RAG Tailors recommends choosing the model that is best suited to the characteristics of the work environment, in accordance with the safety requirements and current standards for respiratory PPE.

To ensure effective protection from respiratory PPE, it is essential to ensure that the respirator seals perfectly to the face. Before each use, the elastic straps must be adjusted so that the respirator fits snugly and comfortably. Always perform a seal test: cover the respirator with your hands and inhale gently; you should not feel any air entering through the edges. Beards, make-up and other factors may compromise the seal. RAG Tailors recommends that you always follow the instructions for use of each model and, if necessary, seek advice from an occupational safety technician.

Air filters are essential components of respirators, responsible for retaining solid particles, dust, fumes or biological agents present in inhaled air. There are several types of filters suitable for different risks: filters against particles (P1, P2, P3), gases and vapors (A, B, E, K, among others) or combined filters. Correct maintenance of air filters for PPE is essential: they must be replaced according to the manufacturer's recommendations or when there is breathing resistance. At RAG Tailors, you can find certified filters compatible with various models of professional respirators.

The replacement of filters and valves in respiratory accessories depends on the type of contaminant, intensity of use and work environment. As a general rule, filters should be replaced when there is increased breathing resistance or the smell of contaminant. Respiratory valves, in turn, should be cleaned regularly and replaced if wear or failure is detected. RAG Tailors recommends maintaining a preventive maintenance plan in order to ensure the continued effectiveness of respiratory PPE and extend the useful life of the equipment.

The main difference between FFP2 and FFP3 masks is the level of filtration. FFP2 masks offer a minimum filtration efficiency of 94% and are recommended for exposure to moderate-risk solid and liquid particles, such as industrial dust and infectious agents. FFP3 masks guarantee a filtration of at least 99%, protecting against toxic substances, dangerous biological agents and carcinogenic dust. Both masks are certified respiratory PPE and should be chosen according to the level of exposure. RAG Tailors offers a complete selection of these masks and offers assistance in choosing the most suitable model.

Personal protective respiratory equipment must comply with European safety standards, namely EN 149 for FFP masks and EN 143/EN 14387 for filters. These certificates guarantee that the equipment has been tested in a laboratory and meets strict performance criteria. To ensure legal compliance and safety in the workplace, it is essential to purchase only certified respiratory equipment. All RAG Tailors products comply with European requirements, providing confidence and reliability to professionals.

Choosing the right respirator accessories depends on the model of respirator or PPE system you are using. It is important to check the fittings and technical specifications before purchasing. RAG Tailors offers a wide range of filters, valves and replacement parts that are compatible with different respirator models. Our team can help you identify the right accessories – just email us with your equipment references and we will be happy to prepare a personalized quote.